This page assumes you’ve already read the Components Basics. Read that first if you are new to components.

Prop Casing (camelCase vs kebab-case)

HTML attribute names are case-insensitive, so browsers will interpret any uppercase characters as lowercase. That means when you’re using in-DOM templates, camelCased prop names need to use their kebab-cased (hyphen-delimited) equivalents:

Vue.component('blog-post', {
// camelCase in JavaScript
props: ['postTitle'],
template: '<h3>{{ postTitle }}</h3>'
<!-- kebab-case in HTML -->
<blog-post post-title="hello!"></blog-post>

Again, if you’re using string templates, this limitation does not apply.

Static and Dynamic Props

So far, you’ve seen props passed a static value, like in:

<blog-post title="My journey with Vue"></blog-post>

You’ve also seen props assigned dynamically with v-bind, such as in:

<blog-post v-bind:title="post.title"></blog-post>

In the two examples above, we happen to pass string values, but any type of value can actually be passed to a prop.

Passing a Number

<!-- Even though `42` is static, we need v-bind to tell Vue that -->
<!-- this is a JavaScript expression rather than a string. -->
<blog-post v-bind:likes="42"></blog-post>

<!-- Dynamically assign to the value of a variable. -->
<blog-post v-bind:likes="post.likes"></blog-post>

Passing a Boolean

<!-- Including the prop with no value will imply `true`. -->
<blog-post favorited></blog-post>

<!-- Even though `false` is static, we need v-bind to tell Vue that -->
<!-- this is a JavaScript expression rather than a string. -->
<base-input v-bind:favorited="false">

<!-- Dynamically assign to the value of a variable. -->
<base-input v-bind:favorited="post.currentUserFavorited">

Passing an Array

<!-- Even though the array is static, we need v-bind to tell Vue that -->
<!-- this is a JavaScript expression rather than a string. -->
<blog-post v-bind:comment-ids="[234, 266, 273]"></blog-post>

<!-- Dynamically assign to the value of a variable. -->
<blog-post v-bind:comment-ids="post.commentIds"></blog-post>

Passing an Object

<!-- Even though the object is static, we need v-bind to tell Vue that -->
<!-- this is a JavaScript expression rather than a string. -->
<blog-post v-bind:comments="{ id: 1, title: 'My Journey with Vue' }"></blog-post>

<!-- Dynamically assign to the value of a variable. -->
<blog-post v-bind:post="post"></blog-post>

Passing the Properties of an Object

If you want to pass all the properties of an object as props, you can use v-bind without an argument (v-bind instead of v-bind:prop-name). For example, given a post object:

post: {
id: 1,
title: 'My Journey with Vue'

The following template:

<blog-post v-bind="post"></blog-post>

Will be equivalent to:


One-Way Data Flow

All props form a one-way-down binding between the child property and the parent one: when the parent property updates, it will flow down to the child, but not the other way around. This prevents child components from accidentally mutating the parent’s state, which can make your app’s data flow harder to understand.

In addition, every time the parent component is updated, all props in the child component will be refreshed with the latest value. This means you should not attempt to mutate a prop inside a child component. If you do, Vue will warn you in the console.

There are usually two cases where it’s tempting to mutate a prop:

  1. The prop is used to pass in an initial value; the child component wants to use it as a local data property afterwards. In this case, it’s best to define a local data property that uses the prop as its initial value:

    props: ['initialCounter'],
    data: function () {
    return {
    counter: this.initialCounter
  2. The prop is passed in as a raw value that needs to be transformed. In this case, it’s best to define a computed property using the prop’s value:

    props: ['size'],
    computed: {
    normalizedSize: function () {
    return this.size.trim().toLowerCase()

Note that objects and arrays in JavaScript are passed by reference, so if the prop is an array or object, mutating the object or array itself inside the child component will affect parent state.

Prop Validation

Components can specify requirements for its props. If a requirement isn’t met, Vue will warn you in the browser’s JavaScript console. This is especially useful when developing a component that’s intended to be used by others.

To specify prop validations, you case provide an object with validation requirements to the value of props, instead of an array of strings. For example:

Vue.component('my-component', {
props: {
// Basic type check (`null` matches any type)
propA: Number,
// Multiple possible types
propB: [String, Number],
// Required string
propC: {
type: String,
required: true
// Number with a default value
propD: {
type: Number,
default: 100
// Object with a default value
propE: {
type: Object,
// Object or array defaults must be returned from
// a factory function
default: function () {
return { message: 'hello' }
// Custom validator function
propF: {
validator: function (value) {
// The value must match one of these strings
return ['success', 'warning', 'danger'].indexOf(value) !== -1

When prop validation fails, Vue will produce a console warning (if using the development build).

Note that props are validated before a component instance is created, so instance properties (e.g. data, computed, etc) will not be available inside default or validator functions.

Type Checks

The type can be one of the following native constructors:

In addition, type can also be a custom constructor function and the assertion will be made with an instanceof check. For example, given the following constructor function exists:

function Person (firstName, lastName) {
this.firstName = firstName
this.lastName = lastName

You could use:

Vue.component('blog-post', {
props: {
author: Person

to validate that the value of the author prop was created with new Person.

Non-Prop Attributes

A non-prop attribute is an attribute that is passed to a component, but does not have a corresponding prop defined.

While explicitly defined props are preferred for passing information to a child component, authors of component libraries can’t always foresee the contexts in which their components might be used. That’s why components can accept arbitrary attributes, which are added to the component’s root element.

For example, imagine we’re using a 3rd-party bootstrap-date-input component with a Bootstrap plugin that requires a data-date-picker attribute on the input. We can add this attribute to our component instance:

<bootstrap-date-input data-date-picker="activated"></bootstrap-date-input>

And the data-date-picker="activated" attribute will automatically be added to the root element of bootstrap-date-input.

Replacing/Merging with Existing Attributes

Imagine this is the template for bootstrap-date-input:

<input type="date" class="form-control">

To specify a theme for our date picker plugin, we might need to add a specific class, like this:


In this case, two different values for class are defined:

For most attributes, the value provided to the component will replace the value set by the component. So for example, passing type="text" will replace type="date" and probably break it! Fortunately, the class and style attributes are a little smarter, so both values are merged, making the final value: form-control date-picker-theme-dark.

Disabling Attribute Inheritance

If you do not want the root element of a component to inherit attributes, you can set inheritAttrs: false in the component’s options. For example:

Vue.component('my-component', {
inheritAttrs: false,
// ...

This can be especially useful in combination with the $attrs instance property, which contains the attribute names and values passed to a component, such as:

class: 'username-input',
placeholder: 'Enter your username'

With inheritAttrs: false and $attrs, you can manually decide which element you want to forward attributes to, which is often desirable for base components:

Vue.component('base-input', {
inheritAttrs: false,
props: ['label', 'value'],
template: `
{{ label }}
v-on:input="$emit('input', $"

This pattern allows you to use base components more like raw HTML elements, without having to care about which element is actually at its root:

placeholder="Enter your username"